Best Frequency Response for Studio Monitors

what is the best frequency response for studio monitors

When it comes to recording from your studio, you want to ensure you have studio monitors that can handle the full frequency range of your recordings.

If you’re interested in learning more about the topic, we’ll provide information about the best frequency response for studio monitors and more.

Despite that, many first-time studio owners make the mistake of not checking the listing of the speakers.

They also sometimes forget to check the supported low and high frequencies.

This is important because you can’t reproduce music accurately if you don’t grab a studio monitor with the right frequency.

That said, there are plenty of studio monitor options that support a wide range of frequencies.

Best Frequency Response for Studio Monitors

Frequency response is vital to audio equipment because it describes the ability of the equipment to reproduce sounds of different frequencies.

When a sound falls outside of a specific frequency, it will become distorted and have variations.

Despite this, the equipment will still produce sound, but it won’t be accurate sound.

If you’re recording music, you must have a good frequency range.

Different instruments and vocals will produce a wide range of frequencies.

Hence, it’s crucial to figure out what sounds you’ll be recording and what studio monitors you’ll use.

Studio Monitors vs. Stereo Speakers

So, how different are studio monitors from stereo speakers?

Studio monitors reproduce accurate audio signals that are flat against the audible frequency spectrum.

They differ from consumer stereo speakers because they don’t emphasize frequencies over others.

Consumer stereos produce strong bass responses and make the sound more robust.

On the other hand, stereo monitors will provide accurate and consistent responses at any volume.

What this does is allow you to listen critically to how the music sounds.

That is especially important if you’re using studio speakers for music production.

In music production, you must listen to how all elements of the mix sound at different volumes.

That way, you can cut out any variability and change the music so that it sounds perfect.

Using studio monitors ensures that you capture all musical transients and any subtle nuances of sound.

To replicate the accurate sound, a studio monitor takes high-quality components and more advanced engineering to help the signal stay flat.

That is why your general set of studio monitors is more expensive than stereo speakers.

What Makes a Good Studio Monitor?

Studio monitors will sound weird to users at first because they may not be aware of the flat response curve.

The music will likely sound wrong, but that doesn’t mean you have a lousy studio monitor.

Most users are accustomed to consumer-market stereo speakers, which pump the music louder, increase bass, and even get distorted.

So, when it comes to buying a studio monitor, you’ll want to understand exactly how the sound is produced.

In this section, we provide a quick breakdown of all the specs you’d need to know, including any specifications in design.

Frequency Response Range

Just because sound equipment has a range listing doesn’t mean that this specification will guarantee the unit can handle the frequency.

The truth is, a monitor still has a frequency response range that you need to account for.

Often, studio monitors will use a plus or minus symbol that will help determine the sound replication.

So, the average sound equipment can range a few decibels depending on the frequency range.

For example, a studio monitor may list that it covers frequencies between 40 Hz and 21 Hz.

You’ll find that there will be a small plus and minus symbol that says 2dB.

What this means is that the frequencies may be louder or softer depending on the varying decibel.

best frequency response for studio monitors

What’s the Best Frequency Response Range?

For the best sound balance for speakers, headphones, and microphones, you’re going to want to find a studio monitor that has a variable rating of 3dB or less.

Anything more, and you will find that the sound won’t be produced without sounding distorted.

Distorted sound will cause any vocals or instruments to sound off-key or off-pitch.

That said,  the variable range for amplifiers, CD/DVD players, and other electronic devices should be plus or minus 0.5 to 1dB.

This produces the most accurate sound when it comes to recording music.

Plus, it will ensure that all sounds won’t have any distortions.

Total Harmonic Distortion (THD)

Another consideration is the THD since it is what describes the accuracy of the frequency response.

This number lets you know how cleanly a studio monitor can produce audio.

To avoid distortion, you will want an audio circuit that has a range between 0.3% and 1%.

Wattage

Another specification you may want to consider is the wattage.

It is one of the most important considerations if you’re working in a studio or a large room.

The watts you’ll want for a studio monitor are anywhere between 10 and 60 if you’re working in a home office or a bedroom.

You may want higher than that if you’re working out of a larger room and mid-sized studios.

Frequency Response FAQs

To understand frequency response better, below are some answers to common questions that can help.

1. What Is the Best Frequency Response for Bass?

The best frequency response for bass is anywhere from 60 Hz to 20 Hz.

At these Hz ranges, you’ll feel the crackling and heart-thumping vibrations.

However, it’s highly recommended that you use a subwoofer if you want the most kick.

Instruments that produce the most bass are drums, organs, and the bass guitar.

2. How Many Watts is a Good Studio Monitor?

For a studio monitor, you’ll want to choose one that has at least 50 watts.

The reason for this is studio monitors don’t improve the sound of your audio as it’s played back.

All watts do is tell you how loud and low the volume goes on the monitors.

Aside from that, low wattage means that the sound will end up more distorted because the monitors won’t be able to produce the sound correctly.

3. How Far Should Your Studio Monitor Be Apart?

As a general rule, you should have each studio monitor be at least six to 12 inches away from each other.

At maximum, you should have them two to three feet apart from each other.

Of course, you can play around with the spacing, but staying in this range produces the best quality sound.

4. Do You Need Two Studio Monitors?

When it comes to studio monitors, most of them are going to get sold individually.

However, you’ll need good stereo sound by using two studio monitors if you’re producing music.

If you’re using them for casual gaming, films, and listening to music passively, then you will be okay with just the one.

Studio Monitor Specs Matters

When you’re creating a studio, you’ll want to make sure that the studio monitors you have will be able to play the music you’re recording.

Professional music software also requires that you have good studio monitors to add nuances to your music.

That said, each person will need different monitors depending on what they’re doing.

As a general rule, anything between the frequency range of 50 Hz and 20 Hz.

Keep in mind that you will still need to keep the wattage and other specifications in consideration.

Hopefully, we’ve helped you understand the best frequency response for studio monitors.

Last updated on:

Leave a Comment

Your email address will not be published. Required fields are marked *